CUSTOMIZED POWER SYSTEMS

Small-scale solar power generation systems in Saudi Arabia

In line with the Saudi Electricity Company’s commitment to the objectives of the Kingdom’s Vision 2030 on renewable and sustainable energy, supporting the national economy, and conserving natural resources, and in response to the bylaw that governs the integration of small-scale solar power systems into the national distribution grid, as per the Saudi Electricity Regulatory Authority’s Administrative Decree No. (2/47/41) dated December 26th, 2019, the Small Scale Solar Power Systems services have now been launched. [pdf]

Base station wind power source load calculation

Wind Load Calculation Wind load is calculated using the following equation: Fw = 1 2 C V ⋅ ⋅ dp ⋅ ⋅ ⋅A ( ) ρ λ 2 Where: • Fw = Force due to wind (lbf, N) 3 3 • ρ = Air Density (.075lb/ft , 1.22 kg/m ) • Cdp = Profile Drag Coefficient (from text or experimental data) • λ = Length/Width Aspect Ratio Correction Factor • V = Wind Velocity (ft/s, m/s) • 2 2 A = Cross Sectional Area Normal to wind direction (length*width) (ft ,m ) 3 Table 1. [pdf]

Off-grid inverter power frequency 5kw

● A 48V off grid PV Inverter with Microchip control for lead acid and lithium iron phosphate batteries. ● Pure sine wave output, utility input single phase +G, inverter efficiency over 90%. ● Adaptive frequency 50Hz/60Hz, utility/solar rechargeable, multiple protection functions, easy to operate. ● Dual MCU intelligent control with 5kw off grid solar inverter provides reliable off grid power supply solution. [pdf]

Tehran off-grid power frequency 50kw inverter

Complete isolation-type inverter technology, noiseless output. Adoption of advanced SPWM technology, pure sine wave output. Dynamic current loop control technology to ensure inverter reliable operation. Wide DC input voltage range. Excellent EMC design. Low output harmonic distortion (THD≤3%). LED indicators for input voltage range, load power range, normal output & failure state. Optional energy saving mode. Extensive protections: reverse polarity, short-circuit, overload, under/over input voltage over-temperature, and inverter’s inner fault identification protections. Wide working temperature range (industrial level). Continuous operation at full power. [pdf]

Wickles SolarTech