HOME / CYLINDRICAL LITHIUM BATTERY MODEL

CYLINDRICAL LITHIUM BATTERY MODEL

11v cylindrical lithium battery

Specifications: Li-Ion Size: 3 x 18650 (cylindrical) Capacity: 3500 mAh Chemistry: Lithium Ion (Li-Ion) Working Voltage: 11.1v / 10.8v Peak Voltage: 12.6v Cut off voltage: 7.5V Max Charging Current: 2.1 Amp Max Discharging Current: 4.2 Amp Limited by Polyswitch Included Qty: 1 Dimensions and Weight Length: 2.75" (70mm) Width: 2.17" (55mm) Height: 0.8" (18mm) Weight: 5.3 Oz Features: No memory effect Longer storage life then NiMH Batteries Light weight and higher energy density than any rechargeable battery Installed PCB (4 Amp) will prevent the battery pack from over charge (> 12.6V), over discharge (<7.5 V), Overdrain (> 4.0Amp) and Short Circuits. [pdf]

What are the advantages of high voltage lithium battery pack

Its power is so higher and its battery life is greater.Higher energy density and up to 15% longer battery life than standard batteries;Stable and high discharge platform; regular usage has no effect on battery life;About 15% more battery energy density results with the same rate and size;The rate cycle performance is capable of sustaining 80% of the initial capacity after 300 cycles;The 3-year service life and the applications of the power industry with high and low temperatures and various rate requirements can be satisfied by reliability test tests that simulate real use; [pdf]

Lithium Battery Station Cabinet Project Introduction

This article will introduce in detail how to design an energy storage cabinet device, and focus on how to integrate key components such as PCS (power conversion system), EMS (energy management system), lithium battery, BMS (battery management system), STS (static transfer switch), PCC (electrical connection control) and MPPT (maximum power point tracking) to ensure efficient, safe and reliable operation of the system. [pdf]

Tonga energy storage lithium iron phosphate battery

The two battery storage facilities installed in Tonga are complementary: the aim of the first 5 MWh / 10 MW battery is to improve the electricity grid’s stability (regulating the voltage and frequency), while the second 23 MWh / 7 MW battery is designed to transfer the electrical load in order to help the grid supply electricity at peak times, and notably in the evening. [pdf]

Wickles SolarTech