POWER INDUSTRY APPLICATIONS

Skopje HJ Communication Micro Base Station Power Generation

A highly integrated and intelligent hybrid power system that combines multi-input power modules (photovoltaic, wind energy, rectifier modules), monitoring units, power distribution units, lithium batteries, intelligent switches, FSU, and ODF wiring, effectively meeting various functional requirements such as power supply, backup power, and optical network access for base station communication equipment. [pdf]

Tehran off-grid power frequency 50kw inverter

Complete isolation-type inverter technology, noiseless output. Adoption of advanced SPWM technology, pure sine wave output. Dynamic current loop control technology to ensure inverter reliable operation. Wide DC input voltage range. Excellent EMC design. Low output harmonic distortion (THD≤3%). LED indicators for input voltage range, load power range, normal output & failure state. Optional energy saving mode. Extensive protections: reverse polarity, short-circuit, overload, under/over input voltage over-temperature, and inverter’s inner fault identification protections. Wide working temperature range (industrial level). Continuous operation at full power. [pdf]

Trolley case mobile energy storage emergency power supply

The 5KW/5kwh mobile energy storage trolley integrates energy storage batteries and hybrid inverters, which is equivalent to a smallmobile power station; as a distributed energy storage power source,it can be used for emergency charging of new energy vehices or for varous smalland medium-sized vehicles anytme and anywhere.Electrical equipment provides power applied to emergency power supply, outdoor work, mobile car repairing, weak power supply system and monitor power supply system. [pdf]

Common topologies of energy storage power supplies

Most popular topologies in this regard include the Dual Active Bridge with Extended Phase Shift (for example in TIDA-010054) which deals with a primary voltage of 700V to 800V DC, and secondary voltage of 350V to 500V DC (single-phase-shift SPS) or 250V to 500V (extended-phase-shift EPS) for power levels up to 10 kW, Phase-shifted Full-Bridge (for example in PMP22951) which deals with a voltage of 400V down to 54V and a power level of 3kW or CLLLC Dual-Active Bridge (for example in TIDM-02002) which deals with a primary voltage range of 380–600V to a secondary voltage range of 280–450V and power levels up to 6.6kW. [pdf]

Wickles SolarTech