HOME / SOLAR LED LIGHTING EXTENSION CORD

SOLAR LED LIGHTING EXTENSION CORD

German solar street lighting system

Environmentally friendly lighting using solar power - in winter, when there is little sun, the light automatically switches to mains grid power.For illuminating streets, yards, driveways, deliveries, access roads, waste collection points, car parks, building yards, recycling centres.Mounted on a round metal pole or with a wall bracket at an extra charge.All-In-Two luminaires represent a good compromise between compact design for normal lighting poles and reliability.The solar module can be rotated separately from the luminaire in the direction of the sun.The brightness is comparable to a 125W mercury vapour lamp or 70W sodium vapour lamp.In winter, we recommend switching down the intensity of the basic lighting to ensure sufficient recharging even at dark weather. [pdf]

Fully automatic booster solar water pump

The solar-specific hot water booster pump adopts an advanced digital control system and can automatically adjust the operating status according to parameters such as water temperature and water flow.The built-in temperature sensor monitors the water temperature in the solar collector, when the set threshold is reached, the water pump is activated to ensure rapid circulation of hot water.Meanwhile, the flow sensor detects the water flow, when the flow rate is lower than the preset value, it will automatically stop working to avoid unnecessary waste of energy. [pdf]

Thin-film solar module warranty

Polysolar warrants the MODULES to be free from the mechanical defects in materials and workmanship that have an effect on module functionality under normal application, installation, use and service conditions for a period of Five (5) year from the date of sale and shipment as shown in the invoice to the customer who purchases the MODULES directly from Polysolar or its certified agents (hereinafter referred to as the “Customer”), and agrees, at its sole discretion, either repair or replace the defective MODULES. [pdf]

Classification of solar glass

Depending on their properties and manufacturing methods, photovoltaic glass can be categorized into three main types: cover plates for flat-panel solar cells, usually made of rolled glass; thin-film solar cell conductive substrates, coated with semiconductor materials typically just a few micrometers thick on the surface of flat glass; and glass lenses or reflectors used in concentrating photovoltaic systems. [pdf]

Wickles SolarTech